Search
Close this search box.

Vacuum Box Leak Testing

As part of our tank inspection service, we conduct vacuum box leak test on tanks to ensure the safety and integrity of above ground storage tanks by preventing accidental leaks and avoiding costly decontamination.
Skydew Energy Services (SES) Ltd uses advanced NDT technologies that improve detection of defects and accuracy of sizing.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Hardness Testing

Hardness testing is a test to determine the resistance which a material exhibits to permanent deformation by penetration of another harder material.

The application of hardness testing enables you to evaluate a material’s properties, such as strength, ductility and wear resistance, and so helps you determine whether a material or material treatment is suitable for the purpose you require. The extensive knowledge base of our NDT team at Skydew Energy Services Ltd aids with producing high-standard technical service to the client.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Liquid Penetrant Inspection (PI)

SSkydew Energy Services (SES) performs Liquid Penetrant Inspection in a variety of asset to identify discontinuities.

Our team of technical expert with years of experience performs this test across various industries with wide range of shapes, sizes, and materials.

Liquid penetrant inspection involves the application of a fluid with low viscosity to the material to be tested. This fluid seeps into any defects such as cracks or porosity before a developer is applied which allows the penetrant liquid to seep upwards and create a visible indication of the flaw. Liquid penetrant inspections can be conducted using solvent removable penetrants, water washable penetrants or post-emulsifiable penetrants.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Radiography Testing (RT)

Skydew Energy Services (SES) Ltd is expert in Radiography Testing (RT) using the conventional film radiography or the Digital Radiography Testing (DRT) technology to inspect the internal structure of assets in the oil and gas, power generation, aerospace, etc. Convectional radiography requires use of radiographic film to capture images through the use of x-ray or gamma ray.

The digital radiography testing requires the use of either special phosphor screens for Computed Radiography (CRT) or flat panels containing micro-electronic sensors for Direct Digital Radiography (DDR) to capture images.

At Skydew Energy Services (SES) Ltd is we uses the new age technology to carry out radiography testing with our team of qualified, certified and experienced radiographers who operates within strict safety parameters to produce high quality radiographs which is interpreted to determine anomaly in line with international standards.

Our DRT is suitable for Weld inspection, profile radiography, Identification of corrosion and erosion, Detection and measurement of corrosion scabs, Detection and assessment of blockages in pipes, Corrosion Under Insulation (CUI), Valve operational issues, Blockages in pipes, Pipe and tube quality inspections.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Magnetic Particle Inspection

Skydew Energy Services (SES) Ltd provides Magnetic Particles inspection (MI) service to client using either Wet Magnetic Particle Inspection (WMPI) or the Dry Magnetic Particle Inspection (DMPI) to detect surface or subsurface defects in ferromagnetic material.

In any of the methods, our technicians magnetize a ferromagnetic material and apply finely-milled iron particles coated with a dye pigment to it. The particles indicate discontinuities in the material by clustering directly over it, which can be visually detected under proper lighting conditions.

At Skydew Energy Services (SES) Ltd we have experts who can perform every step of this quick and cost-effective, process beginning from pre-cleaning and surface preparation, magnetic field introduction, media application and finally interpretation of the resulting indications.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Ultrasonic Testing

Skydew Energy Services (SES) Ltd provides a wide range of Ultrasonic Testing (UT) inspection services to clients in multiple industries including Oil and Gas, aerospace, refining, petrochemical, manufacturing, infrastructure, and power generation.

Skydew Energy Services (SES) Ltd has decades of experience in applying UT inspections across all industrial sectors with the best equipment in the industry.Our UT inspection service cuts across Flaw detection (cracks, inclusions, porosity, delamination etc.), corrosion / erosion wall thickness gauging, precision measurement, bond integrity assessment, estimation of grain size in metals, estimation of void content in composites and plastics etc.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina